-
Titanium Alloy Processing
The first thing to talk about is the physical phenomenon of titanium alloy processing. Although the cutting force of titanium alloy is only slightly higher than that of steel with the same hardness, the physical p...Read more -
Titanium Material Machining Processing
The wear of the insert groove in titanium alloy machining is the local wear of the back and front in the direction of the depth of cut, which is often caused by the hardened layer left by the previous processin...Read more -
Precautions for Processing
(1) The tool should be ground and sharpened diligently to ensure that as little cutting heat as possible is generated during its processing. (2) Equipment, knives, tools and fixtures should be kept clean and chips s...Read more -
Machining Technology of Titanium Alloys 2
Reaming When titanium alloy is reamed, the tool wear is not serious, and both cemented carbide and high-speed steel reamers can be used. When using carbide reamers, the rigidity of the process system similar to...Read more -
Machining Technology of Titanium Alloys
1. Turning Turning of titanium alloy products is easy to obtain better surface roughness, and the work hardening is not serious, but the cutting temperature is high, and the tool wears quickly. In view of these characteristi...Read more -
Reasons for the Difficulty of Processing Titanium Alloys
The thermal conductivity of titanium alloy is small, so the cutting temperature is very high when processing titanium alloy. Under the same conditions, the cutting temperature of processing TC4[i] is more than double tha...Read more -
Processing Method of Titanium Alloy 2
(7) The common problems of grinding are the clogging of the grinding wheel caused by sticky chips and the burn of the surface of the parts. Therefore, green silicon carbide grinding wheels with sharp abrasive grains, hig...Read more -
Processing Method of Titanium Alloy
(1) Use cemented carbide tools as much as possible. Tungsten-cobalt cemented carbide has the characteristics of high strength and good thermal conductivity, and it is not easy to chemically react with titanium at ...Read more -
Titanium Material with CNC Machining
Titanium alloys have excellent mechanical properties but poor process properties, which leads to the contradiction that their application prospects are promising but processing is difficult. In this paper, by analyzing t...Read more -
China Titanium Industry
During the former Soviet Union, due to the large output and good quality of titanium, a large number of them were used to build submarine pressure hulls. Typhoon-class nuclear submarines used 9,000 tons of titanium....Read more -
The Characteristics of Titanium
There are two kinds of titanium ore on earth, one is rutile and the other is ilmenite. Rutile is basically a pure mineral containing more than 90% titanium dioxide, and the content of iron and carbon in ilmenite is ba...Read more -
Global Key Growth
The latest survey report published by MarketandResearch.biz shows that the overall global titanium tetrachloride market needs to pay attention to the huge progress between 2021 and 2027.The evaluation report provides a market share check in both qualitative and quantitative range.The information ...Read more
Send your message to us:
Write your message here and send it to us